Product Name: WDW-10E/20E/30E electronic universal testing machine

Tel: 131-2713-3500

Product overview:

Waterproof material / packaging material testing machine is based on the electronic universal testing machine, the tensile test of waterproof material for the development of an instrument, can complete the tensile, tear waterproof materials and packaging materials and mechanical properties testing.

Electronic universal testing machine adopts single portal structure, tensile,compression, bending in the next room. Universal testing machine is composed of two guiding columns, two ball screw, upper beam, crossbeam, a workbench floor type frame, speed control system is mounted at the lower part of table. By the JapanesePanasonic AC servo motor speed control of high precision, wide range, stable performance by synchronous tooth belt reducer system drives the ball screw rotation,ball screw drive in the beam, the tensile device (or compression, bending and other auxiliary) to move up and down, the loading and unloading specimen. The structure of the frame has enough stiffness, and achieve efficient, smooth transmission. The main components of host processing in processing center, to ensure the accuracy oftesting machine. The ball screw is E5.

Technical parameters:

Technical name of WDW-10E WDW-20E WDW-30E

Maximum test force (kN) 102030

The maximum test load test force measurement range of 0.4%~100%

Test accuracy better than the test value of + 1%

The test force resolution of 200000 yards

Extended meter gauge (mm) 50

The maximum deformation measurement (mm) 10

Deformation measuring range (mm) maximum deformation 2%~100%

Deformation measuring relative error is better than ± 1% test value

Displacement measuring relative error is better than ± 1% test value

Displacement resolution (mm) 0.001

Displacement rate adjustment range (mm/min) 0.005~500, stepless speed regulation

Rate of displacement measuring relative error is better than ± 1% test value

Host size (mm) of 686 × 525 × 1880

Test space width (mm) 370

Stretching stroke (mm) 800

The compression stroke (mm) 800

The maximum stroke beam (mm) 1200

The host quality (kg) 250

The host power supply 0.75kW, AC220V ± 10%

Work environment temperature of 10 ℃ ~ 35 ℃, relative humidity 20% ~ 80%

Standard configuration:

The name WDW-10E WDW-20E WDW-30E number

1 sets of host AC servo motor and system 0.75kW

1 sets of deceleration system

1 sets of software and control system

Ball screw 2 sets

Load sensor 10KN 20KN 30KN 1

Extensometer YYU-10/50 1 only

Photoelectric encoder 2000 line 1

Computer Lenovo brand mainstream configuration 1

HP (A4 printer, inkjet printer) 1

Standard table computer 1

Tension with flat jaw 0mm ~ 7mm 1

Tension with round jaw than 9mm ~ Phi 14mm 1

Compression plate diameter Φ 1201 sets

1 sets of bending auxiliary span 280mm, supporting roller and pressure rollerdiameter 10mm

1 sets of random, ,  tool

1 sets of random file

Special report (need to order 1 sets of flat jaw) 7mm ~ 14mm ~ 9mm diameter Φ 4mm Round ja

Function characteristics:

1 AC servo driver and servo motor, the performance is stable and reliable, with over-current, overvoltage, over speed, overload protection device. Speed ratio is up to 1:100000;

2 with overload, overcurrent, overvoltage, displacement of upper and lower limit andemergency stop protection function;

3 electrical control circuit with reference to international standards, in accordance withnational testing machine electrical standards, strong anti-interference ability, to ensure the stability of the controller, the accuracy of experimental data.